TV Mounting in Los Angeles, CA
In Los Angeles, the main question with a mounted TV isn't whether it looks good on day one. It's whether it'll stay on the wall the next time the ground shakes. A flat-screen sitting on a stand, or a mount screwed only into drywall, is one of the most common things that falls in an earthquake. The wall behind it also varies a lot from one LA home to the next: plaster over wood lath in a 1920s Los Feliz duplex, brick or block around a fireplace in a Spanish Revival living room, drywall over metal studs in a downtown loft or a Westwood condo, or poured concrete in some newer high-rise units. Each one needs a different fastener, and getting it wrong is how mounts pull out.
We locate framing with a stud finder and confirm it with a small test hole, use the right anchors for plaster, masonry or steel studs, and pick a bracket rated well above the weight of your TV. We level it, set it at a viewing height that works for your room, and run cables through an in-wall kit rated for that use or a paintable raceway when the wall can't be opened. We test the connections, put your remote and settings back the way you had them, and clean up any dust and packaging.
What this covers
- Fixed, tilting and full-motion wall mounts
- Mounting into wood studs, metal studs, plaster or brick
- Over-the-fireplace mounting where heat and height allow
- In-wall cable concealment with code-rated kits
- Surface raceways painted to match the wall
- Soundbar and streaming box mounting
- Earthquake straps for TVs left on furniture
- Level, height and viewing-angle setup
How a TV mounting visit usually goes
Plan the Spot
We go over where you'll be sitting, sun glare from your windows, where the outlets and cables are, and what the wall is made of, so the TV goes up at the right height and on the right kind of fastener.
Find Solid Backing
We locate wood or steel studs and confirm them with a test hole, or identify solid brick and concrete, then choose anchors rated for that material and the TV's weight.
Mount and Level
We fasten the bracket, level it, hang the TV, and lock it onto the bracket so it can't lift off in a shake or a bump.
Hide Cables and Test
We run cables through a rated in-wall kit or a paintable raceway, connect and test every device, then clean up dust and haul away the packaging.
Loft and condo buildings around downtown, the Arts District and Koreatown come with their own planning. Many require advance notice, elevator reservations and a certificate of insurance, and some don't allow drilling into concrete columns or shared walls. We'll ask you for the building's rules ahead of time so nothing comes up on the day of the visit. In single-family homes, the common situation is a 1920s living room where the fireplace wall is the only spot that works, or an old plaster wall where the studs aren't where you'd expect. We're used to both. We open the smallest hole possible to confirm what's behind the wall and patch anything we don't use before we leave.
What shapes the price in Los Angeles
The price of a TV mount mostly depends on the wall and the cables. Drywall over wood studs is the simplest. Plaster over lath, brick, block and concrete take more drilling and different anchors, and metal studs in condos need special fasteners or blocking. Full-motion arms take more time to install and level than fixed mounts. Running cables inside the wall costs more than a surface raceway, and a fireplace, a stone surround or a tall ceiling add time. If you want a power outlet added behind the TV so no cord shows at all, our licensed electrician adds it on the same visit, which adds some time and parts. Mounting several TVs, or a soundbar and shelves along with the TV, in one visit keeps the cost per item down.
Neighbors often ask
Will my mounted TV stay put during an earthquake?
A mount fastened properly into wood studs, solid masonry or the right anchors for metal studs is far safer than a TV on a stand. We pick brackets rated well above the TV's weight and make sure the TV is locked onto the bracket, not just hooked on. For TVs that stay on furniture, we can strap both the TV and the cabinet to the wall so neither tips over.
Can you mount a TV above my brick fireplace?
Often, yes. Brick and block can hold a mount well when we drill into solid masonry and use sleeve or wedge anchors, not into the mortar joints. We'll check two things first: whether heat from the fireplace will reach the TV, and whether the height will be comfortable to watch. If the answer to either is no, we'll suggest a lower spot or a pull-down mount.
Can you hide the cables if my wall is plaster or brick?
On plaster over wood studs, we can usually run cables inside the wall using a code-rated in-wall kit, though older walls sometimes have fire blocking or bracing that makes it harder. Brick, block and concrete generally can't be opened, so we use a slim raceway along the surface, painted to match the wall, which looks tidy. We'll tell you which option works for your wall before we start.
My building has metal studs. Will the mount hold?
Yes, as long as the fasteners are right. Light-gauge steel studs won't hold ordinary wood screws, so we use toggle-style anchors rated for steel studs and spread the load across several of them. For a heavy TV on a full-motion arm, we may suggest a mount with a wider plate that catches more than one stud. If the HOA requires anything special for shared walls, we'll follow it.
Folks pair this with
Drywall Repair
Drywall Repair →Furniture Assembly
Furniture Assembly →Door Repair & Adjustment
Door Repair & Adjustment →Ceiling Fan Installation
Ceiling Fan Installation →TV Mounting around Los Angeles
TV Mounting is one of 14 jobs our Los Angeles handyman crew handles, in Los Angeles and in nearby communities:
Ready to get your TV Mounting handled?
Send a photo and a sentence — we'll answer with a real price and a real day on the calendar.